Which spray gun do I need? Conventional, HVLP, LVLP or Suction.
Use the below information to help you make your decision.
Conventional Gravity Spray Guns - FMT4001G or 521805 - Various nozzle sizes available 1.3-2.5mm.
Designed and built for tough work.
Utilize air at a higher pressure than HVLP Spray Guns.
Suitable for solvent-based paints, primer and adhesives.
Perfect for creating splatter effect due to increasing the pressure and atomization.
600ml pot which is great for medium/large jobs.
Excellent mid-range priced spray gun.
Technical Information:
Working Pressure: 50PSI/3.5BAR
Maximum Pressure: 90PSI/6.2BAR
Air Consumption: 13CFM
Air Inlet: 1/4"
Gun Weight: 718g
Pot: 600ml
HVLP Gravity Spray Gun - FMT9500 - Various nozzle sizes available 1.2-1.4mm
Stands for High Volume, Low Pressure. Most common used spray gun due to high quality finishes achieved.
Suitable for water and solvent based paints.
Reduced overspray which reduces waste and paint costs.
Thick coatings will not atomize well with HVLP, such as epoxy.
Good for metallic, base coat, lacquers and top coat.
Large compressor will be required.
Technical Information:
Working Pressure: 20-28PSI/2BAR
Air Consumption: 270L/min
Air Inlet: 1/4"
Paint Pot Thread: M16 1.5
Weight: 450g
Pattern Width: 300mm
Pot Size: 600ml
Stainless Steel Fluid Nozzle
LVLP Gravity Spray Gun - FMT3006 - Various nozzle sizes available 1.3-1.8mm
Stands for Low Volume, Low Pressure. An all-rounder spray gun.
High transfer efficiency gravity spray gun which means less waste.
Suitable for water and solvent based paints and great as a topcoat spray gun.
Operates with a very low air consumption, just 4.2-6CFM depending on the set up specified.
Ideal for those with smaller compressors.
Technical Information:
Working Pressure: 22PSI
Paint Pot Thread: M16 1.5
Weight: 649g
Pot Size: 600ml
Stainless Steel Nozzle and Needle
Conventional Suction Spray Gun - FMT3000 - Various nozzle sizes available 1.3-2.5mm
Tough, durable and gives excellent performance.
Ideal for painting large areas due to the large 1000ml aluminium pot.
Not suitable for water based paints.
Technical Information:
Working Pressure: 50-80PSI
Maximum Pressure: 90PSI/6.2BAR
Air Consumption: 6.9-8.9CFM
Air Inlet: 1/4"
Pot Size: 1000ml
Weight: 1010g
HVLP Gravity Mini Spray Gun - FMT3600 - Nozzles sizes available 0.8mm & 1.0mm
High Volume, Low Pressure Spray Gun.
Excellent build quality at an affordable price.
Just right for SMART touch-up paint repairs and perfect for alloy wheel painting.
Stainless steel components so its suitable for use with water and solvent-based paints.
Ergonomically designed handle.
Wide spray pattern with excellent atomisation.
125ml pot size so great to get in to smaller areas that need spraying.
Technical Information:
Working Pressure: 30PSI/2BAR
Maximum Pressure: 50PSI/3.5BAR
Air Consumption: 9CFM
Air Inlet: 1/4"
Pot Size: 125ml
Thread Size: M14 Female
Weight: 320g